Product Guide

Currently viewing: Product Catalogue > Push Pulls , Stabilisers & Grapples

return to product list

Push Pulls , Stabilisers & Grapples

• Push and Push/Pull Attachments

  

  Our Load pusher & Push Pull range include a basic carriage mounted load pusher which fits between the standard truck forks. Full Push Pull (Slip Sheet Handlers) like Load Pushers discharge product, however they more often feature a plattern and a sheet gripper to pull the load back on with the use of a slip sheet.

  We also have a range of Die Handlers which are used to push and pull die tools in and out of machines.

  Make this selection if ;

  Require a device to push product from the forks or built in plattern.

  click for more information

• Load Stabilisers

  

  Most attachments that we categorise as load stabilisers are designed to rest on top of a load and to prevent the load from being discharged from the fork truck whilst it is in motion. As there are a huge variety of load configurations we have manufactured many designs to fit customer requirements. We do offer a standard range however which consists of a rectangular rubber faced plate hydraulically extended on a linear track similar to a fork lift truck mast. We can also offer stabilising arms that pivot away were they would otherwise interfere, or even stabilisers which bolt onto other hydraulic attachments, for instance to the outer forks on a 2 into 1 attachment.

  Make this selection if ;

  Require load stabilising

  Need a parallel action for stabilising load.

  click for more information

• Load Grapples

  

  Load grapples have a pivoting arm action and are design to swing through an arc to either pull loads back to the carriage or to swing back out of the way when not in use. They offer advantages over load stabilisers in their simplicity of construction if the arc to which the arm swings is suitable for the application. Grapples are designed to trap the load between the fork and the arm. As with load stabilisers the huge variety of load configurations means we have manufactured many designs to fit customer requirements. We do not offer a standard range due to the fact that no two specifications are alike

  Make this selection if ;

  Require attachment for retention on forks

  Retention of cyliner objects.

  Retnention of low height product.

  click for more information

Need Assistance ? If you want to lift, turn, clamp, scoop or stack contact us.